How To Close Your Swimming Pool For The Winter

closing your swimming pool for winter

How To Close Your Swimming Pool For The Winter

So, you already have the pool that you’ve been dreaming of your entire life at your home, and it’s so amazing to have it there during those hot summer afternoons. But, as the cold winter approaches, there is this one thing that can cause you all types of headaches: how to close your above ground pool for the winter?

Well, for once, let us say: closing your pool for the winter properly is a hard and complex task. Here we will provide you with some of the most important tips and basics that you need to know about this, but we strongly suggest hiring a professional for this task if you’d like to make sure that your pool will be properly closed and safe for the whole long winter.

First of all, many important tools and materials are needed, such as pool skimmer and brush, balancers, algaecides, sanitizers and shocks. The first important thing when it comes to closing pools for the winter is the chemical balance. This is important for preventing corrosion or heavy calcium deposits in the water. You will need to check and adjust pH, and the alkaline and acidic qualities level. The pH of your pool must be in the range between 7.2 and 7.6. If after checking the pH you see that the value is outside that range, a pH increaser should be added if pH is lower, and a pH degreaser should be added if pH is higher.

After verifying and adjusting (if needed) pH levels, water hardness has to be checked as well, and adjusted to the proper level of calcium. The level of calcium must be between 175 and 225 ppm (parts per million). In order to increase the level of calcium, a calcium hardness increaser may be used. On the other hand, for reducing the level, some of the water must be drained, and then refill with other water with a lower level of calcium.

The other important tasks that must be performed for assuring a correct chemical balance in your pool before closing are: checking and adjustment of alkalinity, and checking and adjustment of chlorine level. The chlorine is very important because it is responsible for killing all the bacteria, germs and viruses that may be produced in the water. For checking and adjusting both the alkalinity level and the chlorine level in the water, different chemicals are needed, such as alkalinity increaser and pH degreaser.

Once the proper chemical balance is obtained, it’s time to actually close the pool! There are many pool covers that can do the job, each one of them with different pros and cons that a professional may tell you about. Some of them are extremely easy to install, while some others can be a little more complex. One of the most traditional covers is the one made of polyester and covered with PVC, that covers the water and isolates it from the exterior. There are other covers that are also thermic and let the sun go through, therefore heating the water while also avoiding its evaporation.

Another nice addition to your plan of winterizing an above ground swimming pool is the inclusion of above ground swimming pools heaters. Heating your pool is an intelligent investment, because it increases its value and also extends your swimming season. Above ground swimming pools with heaters are not as expensive as some people think, and are especially suitable for cold winters.

Whether you live in a place on which the winter is extremely cold, or in one on which the winter is a bit warmer, there is no doubt that properly closing your pool for the winter is something important if you really care about your pool and its maintenance. So, take these tips into account and get in touch with a professional who can assist you!

Smith Pools & Spas
Assign a menu in the Left Menu options.
Assign a menu in the Right Menu options.