Memphis: (901) 372 - 3639
Southaven: (662) 393 - 4447

Pool Prep & Process

MEASURING YOUR YARD

Get underground utilities marked for free!  TN 1-800-  MS 1-800- AR 1-800-

Round Pools

  1. Divide the pool size by 2 to get the pool’s radius.  example: 24′ pool / 2 = 12′ radius
  2. Find where you would like the center of the pool
  3. Affix one end of tape measure at center of pool and measure out the radius computed in #1.
  4. Walk in a circle to see where the edge of the pool will be.
  5. Move center and repeat process to see which spot and size works best.

Oval Pools

  1. Measure a Rectangle using the pool measurements.
  2. Each corner of the Rectangle can be cut off after drawing out to make the oval shape.
  3. Add 3′ to both sides to account for side braces.

Things to Consider When Measuring

  1. The pool should be at least 5 feet from the house and fence.
  2. Avoid overhead electrical lines.  Phone and cable lines overhead are not a problem.
  3. Avoid underground gas lines and underground electrical lines.
  4. An 8 foot opening is required to get equipment into the yard to level the ground.

INSTALLATION PROCESS

  1. OVERVIEW OF PROPOSED POOL SITE
  2. LEVELING THE POOL SITE
  3. POOL FRAME ASSEMBLY
  4. POOL FLOOR PREPARATION
  5. LINER INSTALLATION
  6. ASSEMBLE ACCESSORIES

NOTE: We usually use one crew for the dirt work and another crew follows to assemble the pool.